ES-360 receiver, The design is exquisite and compact, the UHF receiving signal is stable and strong anti-interference. The power supply design uses two AA batteries (working normally for about 5 hours), and has a V6 USB power supply socket (which can be powered by the USB port on the computer, the mobile power supply of the mobile phone or USB DC adapter), and the 6.35 socket for expansion, which can be used to connect 1 to 3 receivers on the receiver. When the battery is not used, it can be powered by the mobile phone charging line of V8 socket + 3.7V mobile phone charger.
Frequency: | 610-680MHz |
Channels: | 1(Fixed Frequency) |
Response: | 50Hz ~ 18KHz |
RF production: | high-performance integrated IC |
RF bandwidth: | 50MHz |
Signal to noise ratio: | > 105dB (A weighted peak) |
Dynamic range: | > 100dB |
Distortion: | < 1.0% @ 1KHz |
Use temperature: | -18 ~ 50 degrees (Celsius) |
Working Range: | 50 meters |
Receive Mode: | high performance integrated IC |
Sensitivity: | > - 105dB |
Display: | LCD |
Output: | Mixed / two balanced/ unbalanced output |
Channel: | 1 |
RF accuracy: | ± 5ppm<10KHz |
Nominal frequency offset: | 25KHz |
Harmonics: | <- 45dB / c |
Output power: | ≤ 10 mW |
Display: | LCD |
Current consumption: | <150mA @ 3V |
Power supply: | AA 1.5V/3.7V |
Use time: | > 8 hours |